Confined Space Training & Course Melbourne

Confined Spaces Ticket - Confined Spaces Training Certificate - MultiSkills Training

In this Confined Space Ticket course you will learn the skills to enter confined spaces, for maintenance, servicing of vessels or other necessary reasons. You will also learn skills to understand permits and their limitations for confined spaces as well as the observer role for permits requiring a safety observer.

Confined spaces are commonly found in vats, tanks, pits, pipes, ducts, flues, chimneys, silos, containers, pressure vessels, underground sewers, wet or dry wells, shafts, trenches, tunnels or other similar enclosed or partially enclosed structures. A space becomes a defined confined space if work carried out in it could generate harmful concentrations of airborne contaminants.

This Confined Spaces Ticket course will teach you the skills to

Enter confined spaces safely
Understand information relevant to the job
Understand, access and apply hazard controls
Understand risk assessment and risk control measures
Understand a variety of work permits
Types of tests required for the issue of work permits
Emergency procedures

Once participants have completed the Enter and work in confined spaces course, they will receive the nationally recognised unit of competency RIIWHS202E – Enter and work in confined spaces.

Start your training

MultiSkills’ Enter and work in confined spaces course is specifically designed so that personnel will gain a clear familiarity with how to access and work in a confined space as a part of their usual routine with minimal risk to safety.

Upon completing the confined space training certificate course, students will also have an understanding of the work permit system and will know exactly what certain work permits entitle them to and what their limitations are, plus they’ll gain an understanding how to comply with regulations while working in confined spaces.

If you’re interested in finding out more, get in touch with our expert team via our contact page or give us a call on 1800SKILLS.

Click here for a PDF course brochure

Name	Date	Time	Location	Available Spaces	Cost
Enter and work in confined spaces	2 November 2026	07:45 am - 04:00 pm	Geelong Campus	5	$365.00	Apply
Enter and work in confined spaces	4 November 2026	07:45 am - 04:00 pm	Werribee Campus	3	$365.00	Apply
Enter and work in confined spaces	6 November 2026	07:45 am - 04:00 pm	Werribee Campus	6	$365.00	Apply
Enter and work in confined spaces	18 November 2026	07:45 am - 04:00 pm	Werribee Campus	11	$365.00	Apply
Enter and work in confined spaces	18 November 2026	07:45 am - 04:00 pm	Geelong Campus	4	$365.00	Apply
Enter and work in confined spaces	24 November 2026	07:45 am - 04:00 pm	Geelong Campus	11	$365.00	Apply
Enter and work in confined spaces	4 December 2026	07:45 am - 04:00 pm	Werribee Campus	11	$365.00	Apply
Enter and work in confined spaces	17 December 2026	07:45 am - 04:00 pm	Geelong Campus	8	$365.00	Apply

Name	Date	Time	Location	Available Spaces	Cost
Enter and work in confined spaces	2 November 2026	07:45 am - 04:00 pm	Geelong Campus	5	$365.00	Apply
Enter and work in confined spaces	18 November 2026	07:45 am - 04:00 pm	Geelong Campus	4	$365.00	Apply
Enter and work in confined spaces	24 November 2026	07:45 am - 04:00 pm	Geelong Campus	11	$365.00	Apply
Enter and work in confined spaces	17 December 2026	07:45 am - 04:00 pm	Geelong Campus	8	$365.00	Apply

Name	Date	Time	Location	Available Spaces	Cost
Enter and work in confined spaces	4 November 2026	07:45 am - 04:00 pm	Werribee Campus	3	$365.00	Apply
Enter and work in confined spaces	6 November 2026	07:45 am - 04:00 pm	Werribee Campus	6	$365.00	Apply
Enter and work in confined spaces	18 November 2026	07:45 am - 04:00 pm	Werribee Campus	11	$365.00	Apply
Enter and work in confined spaces	4 December 2026	07:45 am - 04:00 pm	Werribee Campus	11	$365.00	Apply

Important Information

Units of Competency

RIIWHS202E – Enter and work in confined spaces

Accreditation & Currency

Usage recommendation: Current
This is a nationally recognised unit of competency (https://training.gov.au)

Age

Minimum 16 years

Duration

1 day

Flexible Delivery

This course can be delivered to accommodate learning styles and employment arrangements.

Class Sizes

Low student to trainer ratio

Assessment Method

Knowledge questions, observation, and practical demonstration

Eligibility

As MultiSkills Training is not CRICOS approved we are unable to enrol any students that are on a student VISA, if you are on a student VISA you will need to go to a TAFE or RTO that is CRICOS approved.

Entry Requirements

Ability to comprehend the English language
A USI Number (Unique Student Identifier) Visit: www.usi.gov.au
Safety footwear

Recognised Prior Learning (RPL)

MultiSkills Training has reviewed the structure and delivery of this unit and determined that Recognition of Prior Learning (RPL) is not offered for this course.

Due to the short duration of the program, the time and effort required for a student to gather sufficient evidence and complete a formal RPL application is likely to exceed the time it would take to complete the training and assessment. In addition, the RTO resources required to assess and validate RPL applications for this course make the process not viable or efficient in this context.

This decision aligns with the guidance outlined in the Outcome Standards Policy Guidance (Standards for RTOs 2025), which recognises that RPL may not be appropriate or practical in all circumstances.

MultiSkills Training is committed to transparency and fairness. Information regarding RPL is also available in our Credit Transfer and Recognition of Prior Learning Policy, which is available on our resources page. In addition, our administrative team is available to discuss this with you upon request.

Additional Information

Upon successful completion of this course, you will be issued with a nationally accredited statement of attainment

Fees

Fee for service

Please refer to the table above.
MultiSkills can also offer V.O.C. (Verification of Competency) options, either on or offsite. Contact us for details.
Card reissue fee – $45

Additional fees

If further training and/or reassessment is required, additional fees will apply and may be up to the full course fee. Please contact us for more information.

Contact Us

If you require further information or would like to book, please contact our friendly administration team on 1800SKILLS or email us at info@multiskills.com.au

Frequently Asked Questions

Is there Recognised Prior Learning (RPL)?

Due to the short duration of this course, RPL is not available because of the significant time and resources needed to complete the process.

A valuable addition to your skillset

Training to work in confined spaces is a valuable addition to your skillset that can be applied across a range of industries. It’s a great way to make yourself more appealing to employers and to stand out with this essential ticket.

MultiSkills training delivers the nationally recognised training course that you need to work safely and effectively in confined spaces. Training is delivered at our Melbourne facility or at client locations.

Deciding to undertake training with MultiSkills means training at an organisation that’s a proven industry leader. Every course that we deliver is run by industry experts. Their goal is to will leave you with a thorough understanding of working in confined spaces, along with the practical skills to succeed.

MultiSkills also offers dogman training, along with courses for elevated work platforms and rigging.

Providing exceptional care and support to everyone who trains with MultiSkills is key to who we are. Students can expect assistance with any problems that they may face throughout the course. We proudly offer state of the art facilities and a team committed to getting the desired outcomes for students.

Our goal is to support your work-related needs and to get you up and running. We provide high-quality learning experiences to equip Victorian students with the skills that they need to succeed in their chosen industry. To take a positive step towards your future, get in touch with our team today and let’s chat about what we can bring to the table

      EXCELLENT  
   Based on 726 reviews 
    
 
 
 
   
 
 
       Posted on Google  
   
   Zayyan Peerbuccus 
 
 
 
 Trustindex verifies that the original source of the review is Google. Completed the two day forklift course and I must say I’ve come a long way. I didn’t feel comfortable nor had the belief in myself that I’d successfully pass the course! Macca was a big help in that getting me over the line, taking his time in assessing me and answering any questions I had.

I’m grateful I was able to have him as my trainer and assessor I can definitely say my confidence to operator a forklift has improved compared to how I was when I first started!
  
 
      Posted on Google  
   
   Jacques Tredoux 
 
 
 
 Trustindex verifies that the original source of the review is Google. Had Kit as my teacher, super informative and adjusts his teaching to the classes experience level which makes the courses less dry for people with prior experience.
  
 
      Posted on Google  
   
   Ryan Wells 
 
 
 
 Trustindex verifies that the original source of the review is Google. I’ve had Adam for my dogging, basic rigging and intermediate rigging. He has a lot of knowledge in the industry and highly recommend getting your high risk work licenses through Multiskills.
  
 
      Posted on Google  
   
   Pat Bolton 
 
 
 
 Trustindex verifies that the original source of the review is Google. Intermediate Rigging course was well structured and organised, Our trainer Adam was very knowledgeable. It was great having someone with real world experience teaching the course.
  
 
      Posted on Google  
   
   MSH 
 
 
 
 Trustindex verifies that the original source of the review is Google. Matthew delivered the course information exceptionally. Thank you SO much
  
 
      Posted on Google  
   
   skye wickham 
 
 
 
 Trustindex verifies that the original source of the review is Google. Mat was very helpful, easy to understand and made the course meaningful
  
 
      Posted on Google  
   
   Paramjit Singh 
 
 
 
 Trustindex verifies that the original source of the review is Google. Very good training organisation..
Special thanks to the trainer Matt McKenzie , he has got wealth of knowledge and experience in civil construction. Thanks to all the the other trainers
  
 
      Posted on Google  
   
   Imma A 
 
 
 
 Trustindex verifies that the original source of the review is Google. Never seen a missing assessment to the rest of the class that can’t be fixed
  
 
      Posted on Google  
   
   Grant Hobson 
 
 
 
 Trustindex verifies that the original source of the review is Google. Thank you to Multiskills for providing excellent forklift training.
Kit Moores is a fantastic trainer, very outgoing and professional, explaining everything clearly and answering any questions thoroughly.
Overall great experience.

Confined Space Training

This Confined Spaces Ticket course will teach you the skills to

Start your training

Important Information

Units of Competency

Accreditation & Currency

Age

Duration

Flexible Delivery

Class Sizes

Assessment Method

Eligibility

Entry Requirements

Recognised Prior Learning (RPL)

Additional Information

Fees

Fee for service

Additional fees

Contact Us

Frequently Asked Questions

Is there Recognised Prior Learning (RPL)?

A valuable addition to your skillset

Ready to take the next step?

Ready to unleash your potential?

Courses

Campuses

More

Contact Info

Join Us!

Contact Us

Get in touch with us!