In this dogman ticket course you will learn the skills required to perform slinging techniques, including the selection and inspection of lifting gear and directing of the crane operator. Successful completion of this course will provide you with your WorkSafe high risk licence to perform dogging.
This course will teach you the skills to
- Understand communication techniques such as whistles, hand signals and use of fixed two-way radios
- Calculate capacity of lifting equipment
- Understand slinging techniques in a variety of conditions
- Select and inspect lifting equipment
- Understand work instructions
- Direct crane operators in the moving of loads
- Identify hazards and assess risks associated with operation
Upon completion of MultiSkills’ Licence to perform dogging training course and achieving competency, participants will be eligible to obtain their High Risk Work licence to perform dogging from WorkSafe Victoria.
Gain the skills you need
Dogging consists of two key abilities. These are the slinging techniques employed for moving a load, including the inspection and selection of any lifting equipment, and the skill to direct a crane or hoist operator who is moving a load that is out of their view. Undertaken across 5 days at either our Geelong or Werribee campus, MultiSkills’ dogging training course will offer you everything you need to learn the skills required of you as a dogman.
If you’re not certain this is the right dogging training course for you or you simply want to know more about what MultiSkills can offer, contact our efficient staff via phone on 1800SKILLS or visit our contact us page.
| Name | Date | Time | Location | Available Spaces | Cost | |
| Licence to perform dogging | 12 - 16 October 2026 | 07:45 am - 04:00 pm | Geelong Campus | 3 | $1,550.00 | |
| Licence to perform dogging | 26 - 30 October 2026 | 07:45 am - 04:00 pm | Werribee Campus | 2 | $1,550.00 | |
| Licence to perform dogging | 9 - 13 November 2026 | 07:45 am - 04:00 pm | Geelong Campus | 1 | $1,550.00 | |
| Licence to perform dogging | 9 - 13 November 2026 | 07:45 am - 04:00 pm | Werribee Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 16 - 20 November 2026 | 07:45 am - 04:00 pm | Geelong Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 16 - 20 November 2026 | 07:45 am - 04:00 pm | Werribee Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 23 - 27 November 2026 | 07:45 am - 04:00 pm | Werribee Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 30 November - 4 December 2026 | 07:45 am - 04:00 pm | Werribee Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 30 November - 4 December 2026 | 07:45 am - 04:00 pm | Geelong Campus | 4 | $1,550.00 |
| Name | Date | Time | Location | Available Spaces | Cost | |
| Licence to perform dogging | 12 - 16 October 2026 | 07:45 am – 04:00 pm |
Geelong Campus | 3 | $1,550.00 | |
| Licence to perform dogging | 9 - 13 November 2026 | 07:45 am – 04:00 pm |
Geelong Campus | 1 | $1,550.00 | |
| Licence to perform dogging | 16 - 20 November 2026 | 07:45 am – 04:00 pm |
Geelong Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 30 November - 4 December 2026 | 07:45 am – 04:00 pm |
Geelong Campus | 4 | $1,550.00 |
| Name | Date | Time | Location | Available Spaces | Cost | |
| Licence to perform dogging | 26 - 30 October 2026 | 07:45 am – 04:00 pm |
Werribee Campus | 2 | $1,550.00 | |
| Licence to perform dogging | 9 - 13 November 2026 | 07:45 am – 04:00 pm |
Werribee Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 16 - 20 November 2026 | 07:45 am – 04:00 pm |
Werribee Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 23 - 27 November 2026 | 07:45 am – 04:00 pm |
Werribee Campus | 4 | $1,550.00 | |
| Licence to perform dogging | 30 November - 4 December 2026 | 07:45 am – 04:00 pm |
Werribee Campus | 4 | $1,550.00 |
Important Information
Units of Competency
- CPCCLDG3001 – Licence to perform dogging
- RIIHAN208E – Perform dogging
Accreditation & Currency
- Usage recommendation: Current
- This is a nationally recognised unit of competency (https://training.gov.au)
- This is a high risk work licence issued by WorkSafe Victoria
Age
- Minimum 18 years
Duration
- 5 days
Flexible Delivery
- This course can be delivered to accommodate learning styles and employment arrangements.
Class Sizes
- Low student to trainer ratio
Assessment Method
- Written activities, verbal questions, observation and practical demonstration
Eligibility
- As MultiSkills Training is not CRICOS approved we are unable to enrol any students that are on a student VISA. If you are on a student VISA you will need to go to a TAFE or RTO that is CRICOS approved
Entry Requirements
- Ability to comprehend the English language
- A photo identification document
- A USI Number (Unique Student Identifier) Visit: www.usi.gov.au
- Safety footwear
- Sunglasses
Recognised Prior Learning (RPL)
MultiSkills Training has reviewed the structure and delivery of this unit and determined that Recognition of Prior Learning (RPL) is not offered for this course.
Due to the short duration of the program, the time and effort required for a student to gather sufficient evidence and complete a formal RPL application is likely to exceed the time it would take to complete the training and assessment. In addition, the RTO resources required to assess and validate RPL applications for this course make the process not viable or efficient in this context.
This decision aligns with the guidance outlined in the Outcome Standards Policy Guidance (Standards for RTOs 2025), which recognises that RPL may not be appropriate or practical in all circumstances.
MultiSkills Training is committed to transparency and fairness. Information regarding RPL is also available in our Credit Transfer and Recognition of Prior Learning Policy, which is available on our resources page. In addition, our administrative team is available to discuss this with you upon request.
Additional Information
Please note that this unit in itself does not result in a High-Risk Work Licence (HRWL) to operate this equipment.
The licence to perform High Risk Work is issued by WorkSafe Victoria. When the assessor deems you competent, you will need to lodge your licence application and Notice of Assessment within 60 days to obtain a high risk work licence.
You can now apply, renew or amend a high risk work licence online at: https://www.myworksafe.vic.gov.au
You will receive an email from myWorkSafe that contains your Training ID. The email will contain a link that allows you to download the Notice of Assessment (NOA) to enable you to lodge your licence application. All licence applications incur a fee payable to WorkSafe Victoria. Further details can be found at: www.worksafe.vic.gov.au/high-risk-work-licence or by calling WorkSafe on 1300 852 562.
Fees
Fee for service
- Please refer to the table above.
- MultiSkills can also offer V.O.C. (Verification of Competency) options, either on or offsite. Contact us for details.
Additional fees
- If further training and/or reassessment is required, additional fees will apply and may be up to the full course fee. Please contact us for more information.
High Risk Work Licence Application
The licence to perform High Risk Work is issued by WorkSafe Victoria. When the assessor deems you competent, you will need to lodge your licence application and Notice of Assessment within 60 days to obtain a high risk work licence.
You can now apply, renew or amend a high risk work licence online at: https://www.myworksafe.vic.gov.au
You will receive an email from myWorkSafe that contains your Training ID. The email will contain a link that allows you to download the Notice of Assessment (NOA) to enable you to lodge your licence application. All licence applications incur a fee payable to WorkSafe Victoria. Further details can be found at: worksafe.vic.gov.au/high-risk-work-licence or by calling WorkSafe on 1300 852 562.
Contact Us
If you require further information or would like to book, please contact our friendly administration team on 1800SKILLS or email us at info@multiskills.com.au
Frequently Asked Questions
What is a dogman ticket?
A dogman ticket is a Worksafe licence to perform high risk work. It’s a certification that a worker must legally hold to undertake dogging work on a jobsite. Essential to a wide variety of industrial, civil, mining, gas and construction projects, dogmen handle the manoeuvring and slinging of loads including tools, materials and equipment.
How much is a dogman ticket?
Getting a dogman ticket requires both theory and practical training and assessment. At MultiSkills Training, you can undertake training and get assessed for your dogman licence for $1500 per person.
What is the difference between a dogman and a rigger?
The work of dogmen and riggers will often look similar, but there are tasks and responsibilities that a rigger can take on that dogmen can’t. Where a dogman can select and inspect lifting gear, sling loads, and direct a crane or hoist operator in the movement of loads; a licenced rigger can move plant and equipment, erect steel and materials hoists, install static lines and safety nets, and erect a variety personnel platforms, safety nets and static lines. Important to note though, both dogmen and riggers need to have an HRW Licence to undertake their work.
What can a dogman lift?
WorkSafe Victoria describes dogging and dogmen as: “Workers who need to exercise judgement to sling loads or who direct crane movement from outside the crane operator’s full view (such as with whistle signals or radio).”For more information on dogman work in Victoria, get in contact with MultiSkills Training today.
Is there Recognised Prior Learning (RPL)?
Due to the short duration of this course, RPL is not available because of the significant time and resources needed to complete the process.
MultiSkills Training is committed to transparency and fairness. Information regarding RPL is also available in our Credit Transfer and Recognition of Prior Learning Policy, which is available on our resources page. In addition, our administrative team is available to discuss this with you upon request.
A valuable addition to your skillset
A dogging ticket is an essential licence on many jobsites across a variety of industries, from civil and building construction, infrastructure, mining, oil & gas and more.
MultiSkills Training offers our WorkSafe high risk dogman licence course at our fully equipped Melbourne and Geelong locations. If you want to develop your skills further, we also offer the riggers ticket training course at both locations. Our trainers are industry experts and will provide you with the professional training you need to become a safe, effective and productive dogman.
All MultiSkills courses – from skid steer training to working at heights – are designed and delivered by knowledgeable trainers with years of experience working in industry. Keeping class numbers low allows more time with the trainer for each student, ensuring better outcomes and a higher level of career readiness for you.
Choose a training organisation that’s dedicated to its students. Our mission is empowering Victorian students, helping them reach their full potential through the delivery of high-quality learning experiences. Whether you’re new to the industry and are looking to get started, or are an experienced professional looking to upskill, we can assist you.
Discuss your goals and requirements with the team at MultiSkills Training today. With a range of courses in various nationally recognised units of competency, it’s easy to find a course that makes you a better, more employable professional. Book now and start learning either onsite at your own jobsite or at our Melbourne or Geelong locations.
